Moving a large piece of equipment like a NordicTrack treadmill can feel daunting, especially when you need to get it through a standard doorway. If you’re wondering how to move nordictrack treadmill 1750 through doorway, you’re in the right place. This guide breaks down the process into simple, safe steps anyone can follow. With a little preparation and the right technique, you can relocate your treadmill without damage to your machine, your walls, or yourself.
How to Move NordicTrack Treadmill 1750 Through Doorway
Before you touch the treadmill, planning is essential. Rushing this process is the most common cause of problems. A good plan makes the physical work much easier and prevents costly mistakes.
What You’ll Need to Get Started
Gathering your tools and helpers first saves time and frustration. Here’s your checklist:
- A friend or family member to help. Do not attempt this alone.
- Adjustable wrench or the specific tools that came with your treadmill.
- Phillips-head screwdriver.
- Moving blankets or thick towels.
- Cardboard or plywood to protect floors.
- Measuring tape.
- Plastic bags and tape for small parts.
Step 1: Measure Everything Twice
First, measure the treadmill’s widest points. For the NordicTrack 1750, this is usually the console arms or the base frame. Next, measure the width and height of the doorway you need to pass through. Don’t forget to measure any hallways or turns. Compare the numbers. If the treadmill is wider than the door, you will need to disassemble it partially.
Step 2: Prepare the Treadmill and Path
Unplug the treadmill from the wall. Secure the power cord with tape so it doesn’t dangle. Clear a direct path from the treadmill’s current location to its new spot. Remove any rugs, decor, or furniture that could be an obstacle. Lay down cardboard or plywood over hard floors to protect them from scratches and allow for easier sliding if needed.
Step 3: Lower the Console and Incline
This is a crucial step for reducing height. Use the console’s adjustment feature to lower it to its very lowest position. If your model allows it, you might be able to pivot the console forward. Next, make sure the incline is set to zero. This lowers the entire deck profile and brings the center of gravity down.
Safety Tip: Consult Your Manual
Your NordicTrack 1750 owner’s manual has model-specific instructions for preparing to move. It might show a specific way to lock the deck or adjust the console. Having this guide on hand is always a smart move, especially if you’ve lost the paper copy, you can usually find a PDF online.
Step 4: Partial Disassembly (If Required)
If your measurements show the treadmill won’t fit, you’ll need to remove a few parts. This is simpler than it sounds.
- Remove the console. First, locate the bolts or screws connecting the console arms to the base. Have your helper support the console’s weight. Carefully loosen and remove the bolts, placing them immediately into a labeled plastic bag. Gently set the console aside in a safe place, preferably on a soft blanket.
- Remove the side rails. The uprights that hold the console often detach next. Again, use your wrench to remove the bolts at the base. Keep all hardware organized by step.
Step 5: The Actual Move Through the Door
Now for the main event. With the treadmill in its most compact form, follow these steps carefully.
- Position the treadmill. With your helper, carefully tilt the treadmill back onto its rear wheels. Most NordicTrack models have transport wheels at the front. Tilting it uses these wheels like a dolly.
- Use the blankets. Drape moving blankets over the door frame to protect it from any accidental bumps. You can also wrap the treadmill frame itself.
- Navigate the doorway. Slowly walk the tilted treadmill toward the door. The person at the front guides and steers, while the person at the back controls the tilt and stability. Communicate clearly. Go slowly and check your clearance at all times.
- Mind the angle. You may need to angle the treadmill slightly to get the widest part through the opening. A slight diagonal approach can often provide those extra few inches you need.
Step 6: Reassembly and Final Check
Once the treadmill is in its new room, carefully lower it back down. Don’t just let it drop. Reverse your disassembly steps to put the console and uprights back on. Tighten all bolts firmly, but avoid over-tightening which can strip the threads. Plug the machine back in. Perform a quick safety check: walk on the belt at a slow speed to ensure everything is aligned and functioning correctly.
Common Mistakes to Avoid
- Not measuring first. This leads to getting stuck mid-move.
- Trying to lift the treadmill fully. Always use the wheels and a tilting motion.
- Losing hardware. Label your bags of bolts and screws.
- Forgetting to lower the incline and console. This adds unnecessary height and weight distribution issues.
- Rushing. Patience is your best tool for preventing injury and damage.
When to Call Professionals
If your path involves stairs, multiple tight corners, or you simply don’t have the help, hiring professional movers is a wise investment. They have the equipment and experience to handle heavy fitness gear safely. It can save you from a potential injury or a repair bill that costs more than the service fee.
FAQ: Moving Your NordicTrack Treadmill
Can I move my NordicTrack 1750 by myself?
It is strongly not recommended. The treadmill is heavy and awkward. Having a second person is crucial for balance and safety, preventing damage and personal injury.
Do I need to take the motor apart to move it?
No. You should never disassemble the motor or internal mechanics. The moving process only requires removing external parts like the console and uprights to reduce width.
How do I protect my hardwood floors during the move?
Use large sheets of cardboard or hard plastic moving sheets under the treadmill base. When tilting, ensure the wheels roll over this protective layer. Felt furniture pads on the base feet can also help for final placement.
What if my treadmill won’t fit even after taking the console off?
In very rare cases with extremely narrow doors, you may need to remove the walking deck from the frame. This is a complex task. Consult your manual or contact NordicTrack support for guidance before attempting this level of disassembly.
How heavy is the NordicTrack 1750 treadmill?
The assembled weight is approximately 300 pounds. While the wheels help, the weight is distributed unevenly. This is why a helper is non-negotiable for control and stability.
Moving your NordicTrack 1750 through a doorway is a manageable project with the right approach. The key is preparation: measure your space, gather tools and a helper, and follow the steps to reduce the treadmill’s profile. Taking your time and prioritizing safety will ensure your treadmill arrives in its new location ready for your next workout. With this guide, you have a clear path to getting it done efficiently.