If your Horizon treadmill is making a squeaking or grinding noise, you might need to reset its maintenance reminder. Learning how to reset lube belt on horizon treadmill is a simple process you can do yourself. This guide will walk you through the steps to clear that alert and get you back to running smoothly.
How to Reset Lube Belt on Horizon Treadmill
Resetting the lube belt indicator is straightforward. The exact method varies slightly depending on your treadmill’s console model. The most common way involves using the manual buttons on the console while the treadmill is in standby mode.
What You’ll Need Before You Start
Gather a couple of basic items. You won’t need any special tools for the reset itself.
- A clean, dry cloth.
- Your treadmill’s user manual (helpful for model-specific details).
- The treadmill’s safety key.
Step-by-Step Reset Instructions
Follow these numbered steps carefully. Make sure the treadmill is plugged in but not running at the start.
- Insert the safety key into the console. The display should light up.
- Do not start the belt. The treadmill should be in standby or ready mode.
- Press and hold the “Stop” button and the “Speed Down” button simultaneously. Hold them for about 3 to 5 seconds.
- You should see the display change or flash. This often shows the maintenance code (like “E07”) before it clears.
- Release the buttons. The lube belt reminder should now be reset.
If that combination doesn’t work, try “Stop” + “Speed Up” or “Stop” + “Incline Down.” Consult your manual for the precise button combination for your specific Horizon T-101, T-202, 7.0 AT, or other model.
What to Do If the Reset Doesn’t Work
Sometimes the indicator won’t clear. Here are a few reasons why and what to check.
- The belt might actually need lubrication. The reminder is there for a reason. If it’s been over 3 months or 130 hours of use, you should probaly lube it first.
- You might be using the wrong button combo. Double-check your owner’s manual or Horizon’s website.
- The console could have a minor glitch. Try unplugging the treadmill from the wall for 60 seconds, then plug it back in and attempt the reset again.
Identifying Your Console Type
Horizon uses a few different console designs. Knowing yours helps find the right instructions. Look for a simple button-only console or one with a small LCD screen. The button reset method works for most, but newer touchscreen models may have a digital menu option under “Settings” or “Maintenance.”
How to Properly Lubricate Your Treadmill Belt
Resetting the light is one thing, but maintaining your treadmill is crucial. A properly lubricated belt reduces friction, protects the motor and deck, and makes your run quieter. Here’s how to do it correctly.
- Unplug the Treadmill: Always disconnect power from the wall for safety.
- Locate the Lubrication Points: You’ll need to lift and center the running belt to access the deck underneath. Gently pull the belt up from one side to create a gap.
- Apply the Lubricant: Use only silicone-based treadmill lubricant. Apply a thin bead along the deck under the belt, about the width of the belt, on both sides. Avoid using to much.
- Spread the Lubricant: Carefully lower the belt. Plug the treadmill back in. Run the belt at a slow speed (2-3 MPH) for 2-3 minutes to evenly distribute the lubricant across the entire deck surface.
Remember to wipe off any excess lubricant that squeezes out the sides with your clean cloth. Performing this maintenance regularly can prevent many common treadmill problems.
Why the Lube Belt Reminder Is Important
Ignoring this alert can lead to bigger issues. The reminder is based on typical usage, and it’s a helpful nudge to perform essential care.
- Reduces wear on the belt and deck, saving you money on replacements.
- Prevents motor strain and overheating, which can cause premature motor failure.
- Ensures a consistent, smooth ride without jerking or sticking.
- Minimizes noise for a more pleasant workout experience.
Troubleshooting Common Treadmill Noises
After resetting and lubricating, noises should disappear. If they persist, here’s what else to check.
Squeaking Sounds
Squeaks often come from friction. If lubrication didn’t fix it, the belt might be to tight or the roller bearings could be dry. Check your manual for belt tension adjustment.
Thumping or Rubbing Noises
A thump could mean something is stuck under the belt or the deck is damaged. A rubbing sound might indicate the belt is misaligned and scraping the side rail.
When to Call for Service
If you’ve reset the light, lubricated the belt, and checked for obstructions but problems continue, it’s time to contact Horizon support or a local technician. Electrical issues or internal component failure require proffesional help.
FAQ Section
How often should I lube my Horizon treadmill belt?
Horizon generally recommends lubricating the belt every 3 months or after every 130 hours of use, whichever comes first. Your specific model’s manual has the best guideline.
Can I use WD-40 on my treadmill belt?
No, never use WD-40. It is not a lubricant for this purpose and can damage the belt and deck. Always use a 100% silicone-based treadmill lubricant.
The reset button combo isn’t working on my Horizon treadmill. What now?
First, ensure you are using the correct combination for your console. Try unplugging the unit to reset its computer. If it still fails, the console may need servicing, or the reminder may be hard-coded after a certain mileage and require a technician’s tool to reset.
How do I reset the maintenance light on a Horizon treadmill with a touchscreen?
Navigate through the console’s menu system. Look for a “Settings,” “Maintenance,” or “Service” icon. Inside that menu, there should be an option to reset maintenance reminders or clear error codes.
What does the lube belt error code mean?
It’s simply a maintenance timer, not an error. It’s programmed to alert you after a certain period of usage to remind you to perform routine belt lubrication for optimal machine health.
Keeping up with basic maintenance like resetting the lube indicator and applying silicone lubricant will extend the life of your Horizon treadmill. It ensures every workout is as quiet and efficient as the day you bought it. Regular care is the key to avoiding costly repairs down the road.