Keeping your treadmill in good shape is essential, and knowing how to oil urevo treadmill is a key part of that. This simple maintenance task reduces wear on the belt and deck, making your runs smoother and quieter. It also helps your machine last much longer.
This guide will walk you through the entire process step-by-step. You’ll learn what supplies you need, how to check if oiling is needed, and the correct technique to apply it. Let’s get started.
How To Oil Urevo Treadmill
Oiling your Urevo treadmill isn’t complicated, but doing it correctly matters. Following the right steps ensures you don’t use too much or too little lubricant. First, you need to gather a few basic items.
What You’ll Need
Before you begin, collect these supplies. Having everything ready makes the job quicker and easier.
- Silicone-based treadmill lubricant: This is crucial. Never use WD-40, household oil, or spray silicone.
- A clean lint-free cloth or paper towels
- A screwdriver (usually a hex key or Allen wrench, often provided with your treadmill)
- A vacuum cleaner with a brush attachment (optional but helpful)
Step 1: Safety First – Unplug the Treadmill
Always, always unplug the power cord from the electrical outlet. This prevents any accidental starts and keeps you completely safe while working. Don’t just turn it off; physically disconnect it.
Step 2: Check If Your Treadmill Needs Oiling
You don’t need to oil your treadmill every month. Over-lubricating can cause problems. Here’s a simple test to see if it’s time.
First, locate the center of the running belt. Lift it up slightly and try to slide your hand between the belt and the deck. If there’s little resistance and your hand moves easily, you likely need lubricant. If it feels sticky or grabs your hand, it’s probably okay for now.
Another sign is if the belt seems to stick or jerk during use, or if the motor is working harder than usual.
Step 3: Center the Running Belt
This is an important preparatory step. Turn the belt by hand and look at the alignment marks on the sides. The belt should be centered between these marks. If it’s shifted to one side, you’ll need to adjust it before oiling.
To adjust, use the hex key to turn the rear roller adjustment bolts. Turn the left bolt clockwise a quarter-turn to move the belt right, or the right bolt clockwise to move it left. Go slowly and check frequently.
Step 4: Clean the Area Under the Belt
Now you need to lift the belt to access the deck. Loosen the two rear roller adjustment bolts on each side about one full turn counter-clockwise. This creates enough slack to lift the belt.
Carefully lift the belt along one side and slide your cloth or a paper towel underneath. Wipe the entire deck surface to remove old dust, debris, and any old lubricant residue. You can use a vacuum attachment first to suck up loose dirt.
This cleaning step ensures the new lubricant can work effectively without grinding dirt into the deck.
Step 5: Apply the Silicone Lubricant
This is the core of learning how to oil urevo treadmill. Refer to your manual for the specific pattern, but a common method is the “two-line” technique.
- With the belt still lifted, apply a thin, continuous line of silicone lubricant along the deck, about 3-4 inches from the left edge. The line should run from the front roller to the rear roller.
- Apply a second parallel line about 3-4 inches from the right edge.
- Do not pour or spray excessively. You typically only need about 1/2 ounce (15 ml) total, which is roughly a capful for many bottles.
Some manuals recomend a zig-zag or an “X” pattern. If you’ve lost your manual, the two-line method is a safe and effective approach for most models.
Step 6: Spread the Lubricant and Re-tighten
After applying the lines, lower the belt. Now, you need to spread the lubricant evenly across the deck.
Reconnect the power cord briefly. Stand on the side rails, not the belt. Start the treadmill at a very slow speed, like 1-2 mph, and let the belt run for 30 to 60 seconds. This allows the belt to naturally distribute the silicone.
Stop the treadmill and unplug it again. Now, re-tighten the rear roller adjustment bolts you loosened earlier. Turn them clockwise until they are snug, but do not over-tighten. Check that the belt is still centered.
Step 7: Final Check and Clean Up
Give the belt a final visual check for alignment. Wipe any excess lubricant that may have seeped out from the edges with your cloth. Plug your treadmill back in and give it a quick test at a slow speed to ensure everything runs smoothly and quietly.
Your maintenance is now complete! Properly oiling your treadmill like this should keep it running well for many months of use.
How Often Should You Oil Your Urevo Treadmill?
Frequency depends on how much you use it. A good general rule is to check every three months. If you use your treadmill heavily (more than 10 hours per week), you might need to oil it more often, perhaps every 1-2 months.
Light users (less than 3 hours a week) may only need to do this every 6 months. Always rely on the hand test described in Step 2 rather than just a calendar.
Common Mistakes to Avoid
Even with good instructions, people sometimes make errors. Here’s what to watch out for.
- Using the wrong lubricant: Only use 100% silicone treadmill lubricant. Other oils can damage the belt and deck.
- Over-tightening the belt: A belt that’s too tight puts strain on the motor and rollers. It should have a little bit of lift when you pull up on it.
- Applying oil to the top of the belt: Lubricant always goes under the belt, on the deck. Never apply it to the walking surface.
- Forgetting to clean first: Oiling over dirt just creates a grinding paste that wears down your machine faster.
Troubleshooting: Issues After Oiling
If you followed the steps but your treadmill still isn’t running right, here are some tips.
The Belt Is Slipping or Jerking
This usually means the belt is too loose. Try tightening the rear roller adjustment bolts a quarter-turn on each side. Test and repeat if necessary, but only in small increments.
The Motor Sounds Labored or the Belt is Slow
This could mean the belt is too tight. Loosen the adjustment bolts a tiny bit. Also, ensure you didn’t use too much lubricant, as this can sometimes create suction.
The Treadmill Still Makes Noise
Squeaking or rubbing noises might not be from the deck. Check for other sources like the motor cover, console, or rollers. Sometimes debris gets caught in the rear roller area.
If a grinding noise persists, their could be an issue with the motor or drive belt, which requires professional service.
FAQ Section
Here are answers to some frequently asked questions about Urevo treadmill maintenance.
What kind of oil do I use on a Urevo treadmill?
You must use a high-quality, 100% silicone-based treadmill lubricant. Many brands make this specific product. Do not substitute with household oils, vegetable oil, or spray lubricants, as they can ruin the deck.
Can I use WD-40 on my treadmill?
Absolutely not. WD-40 is a degreaser and penetrant, not a lubricant. It will dry out the materials and cause significant damage to the belt and deck over a very short time.
How do I know if my treadmill belt is too tight?
If you can’t lift the belt about 2-3 inches off the deck at the center, it’s probaly too tight. A overly tight belt strains the motor, increases wear, and can cause performance issues.
How long should I wait after oiling before using the treadmill?
You can use it almost immediately after spreading the lubricant by running the belt for a minute. There’s no long waiting period required for silicone lubricant to set.
Why is my treadmill belt moving to one side?
This is called tracking. It’s usually fixed by adjusting the rear roller bolts. If the belt drifts left, turn the left adjustment bolt clockwise a tiny bit. Always make equal adjustments on both sides to maintain proper tension.
Where can I buy Urevo treadmill lubricant?
You can purchase compatible silicone treadmill lubricant online (like on Amazon or Walmart’s website) or at most fitness equipment stores. The brand isn’t as important as the type—just ensure it’s 100% silicone for treadmills.
Regular maintenance, including knowing how to oil urevo treadmill properly, is the best way to protect your investment. It ensures quite operation, prevents premature wear, and gives you a better workout experience. Set a reminder to check your treadmill every few months, and it will serve you well for years to come.