If you own a Precor treadmill, you might wonder how to check mileage on Precor treadmill models. Knowing the total distance your machine has logged is useful for tracking your progress and planning maintenance. This guide covers all the common methods for finding this info on various Precor consoles.
Whether you have a newer touchscreen or an older model with buttons, the process is usually straightforward. We’ll walk you through the steps for different console types and explain what to do if you run into problems.
How to Check Mileage on Precor Treadmill
Precor treadmills track two main types of mileage: the lifetime total for the machine and the workout total for your individual session. The lifetime mileage is often the figure people are looking for. The method to access it depends almost entirely on the console generation.
For Newer Precor Consoles (P80, P82, P83, etc.)
Modern Precor consoles with color touchscreens store the data in the “Manager’s Menu.” This is a seperate menu from the standard user interface. Here’s how to find it:
- Ensure the treadmill is powered on and at the main screen.
- Simultaneously press and hold the “Stop” and “Pause” buttons for about 5 seconds.
- The Manager’s Menu will appear. Use the screen to navigate.
- Look for options like “Machine Info,” “Diagnostics,” or “Usage Data.”
- The lifetime mileage, often listed as “Total Distance” or “Lifetime Odometer,” will be displayed here.
For Older Precor Consoles (Keypad Models)
Older models, like those with the 9.35 or 9.4 console, often show the lifetime miles during the startup sequence. Try this:
- Turn the treadmill completely off using the power switch, usualy located near the cord.
- Wait 10 seconds, then turn it back on.
- Immediately as the display lights up, watch the screen carefully. The lifetime mileage may flash briefly before the normal workout screen appears.
- If you miss it, you may need to repeat the process. Some models require you to press and hold the “Quick Start” or “Mode” button during power-up.
Using the Quick Start Button Method
On many keypad consoles, there’s a hidden diagnostics mode.
- Turn off the treadmill at the power switch.
- Press and hold the “Quick Start” button.
- While holding the button, turn the power switch back on.
- Continue holding “Quick Start” until a diagnostic code appears (like “—“).
- Press the “Speed +” or “Incline +” button to scroll through different data points until you see the odometer reading.
Checking Your Workout Mileage
This is much simpler than finding the lifetime total. For any workout, the distance you’ve covered in that session is always shown prominently on the main workout screen. It’s typically in the center or top section of the display. Just glance at the console during your walk or run to see your progress adding up.
What If the Mileage Doesn’t Display?
Sometimes, the mileage might not show due to a few common issues. Don’t panic; here are some troubleshooting tips.
- Console Reset: Unplug the treadmill from the wall for 5 full minutes. This can clear temporary glitches and restore the display.
- Check the Batteries: Some consoles have a backup battery to save data like the odometer. If this battery is dead, the mileage might reset to zero. A technician can replace it.
- Firmware Issues: Very rarely, corrupted software could cause display problems. Precor service can reload the firmware if needed.
If you’ve tried these steps and the mileage is still missing or reads zero, the memory chip itself might have failed. In this case, contacting Precor support or a certified technician is your best next step.
Why Checking Your Treadmill’s Mileage Matters
It’s not just about curiosity. Keeping an eye on your treadmill’s lifetime distance has practical benefits for maintenance and your budget.
- Belt and Deck Maintenance: The running belt and deck are wear items. Most manufacturers recommend lubricating the belt every 150-200 miles and inspecting the deck for wear. Knowing the mileage helps you stick to this schedule.
- Predicting Repairs: Components like the drive motor and roller bearings have typical lifespans. High mileage can indicate that these parts may need service soon, helping you avoid a suprise breakdown.
- Resale Value: If you plan to sell your treadmill, an accurate lifetime mileage reading is like a car’s odometer. It gives potential buyers a clear idea of how much use the machine has had.
Keeping a Maintenance Log
Once you find your mileage, write it down with the date. Start a simple log to track future maintenance. Note when you lubricate the belt, clean the machine, or perform any repairs. This record is invaluable and can extend the life of your equipment significantly.
FAQs About Precor Treadmill Mileage
How do I see the miles on my Precor treadmill?
You typically need to access a hidden menu or watch the startup screen. For touchscreen models, hold “Stop” and “Pause” to enter the Manager’s Menu. For older models, try turning it off and on while watching the display or holding the Quick Start button during power-up.
Can you reset the mileage on a Precor treadmill?
The lifetime odometer is not designed to be reset by the user. It’s stored in non-volatile memory. Resetting it usually requires specialized software and is generally only done by Precor technicians after a major component replacement.
Where is the odometer on a Precor treadmill?
The odometer isn’t a physical dial. It’s a digital counter stored in the console’s computer. You view it through the console’s display by following the specific access methods for your model.
My Precor treadmill mileage reset to zero. What happened?
A sudden reset to zero often indicates the small backup battery inside the console has died. This battery preserves memory when the treadmill is unplugged. A technician can install a new battery, but the previous mileage data is usually lost unless it was also stored in a more permanent memory chip.
Is there a manual that shows how to check mileage?
Most user manuals don’t cover the hidden menus. For official instructions, your best bet is to contact Precor customer support directly with your treadmill’s full model and serial number. They can provide the most accurate guide for your specific machine.
Finding your treadmill’s lifetime distance might take a minute, but it’s a valuable piece of information. With the steps above, you should be able to locate it on most Precor models. Remember to jot it down and use it to keep your treadmill in top shape for many more miles to come.